Operation Manual

VigorSwitch G1260 User’s Guide
60
Port Control
This is used to set the operation mode of authorization.
There are two type of operation mode supported,
Authorized, Auto.
Auto - The controlled port is set to be in authorized state
or unauthorized state depends on the result of the
authentication exchange between the authentication
server and the supplicant.
Authorized - The controlled port is forced to hold in the
authorized state.
Force Unauthorized –The controlled port is forced to
hold in the unauthorized state.
Default: Authorized
Show the port status of authorization.
Status
Re-authenticate - Specify if subscriber has to periodically
re-enter his or her username and password to stay
connected to the port.
Re-authenticate All - Re-authenticate for all ports in at
once.
Force Reinitialize - Force the subscriber has to reinitialize
connected to the port.
Force Reinitialize All - Force Reinitialize for all ports in
at once.
Statistics - Choose the port which you want to show of
802.1X statistics, the screen include Authenticator
counters, backend Authenticator counters, dot1x MIB
counters and Other statistics.
Press the <Refresh> button will fresh the screen and see
the newer counters.