Operation Manual

VigorSwitch G1260 User’s Guide

Port Members is used to enable or disable if a port is a

member of the new added VLAN, “Enable” means it is a

member of the VLAN. Just tick the check box () beside

the port x to enable it.

Click <Apply> to have the setting taken effect.

VLAN Configuration List ID - When you want to edit a VLAN group, you must

select the Group ID field. Then, you will enter Tag Base

VLAN Group Setting or Port Base VLAN Group Setting

page, which depends on your VLAN mode selection.

Member - Display the selected port members that will

apply to such VALN group.

Modify - Just press the <Modify> button to edit the

selected group entry.

Delete - Just press the <Delete> button to remove the

selected group entry from the Tag-based group table.

Refresh – Just press it to refresh current page.