Operation Manual

VigorSwitch G1260 User’s Guide

Port Member is used to enable or disable if a port is a

member of the new added VLAN, “Enable” means it is a

member of the VLAN. Just tick the check box () beside

the port x to enable it.

Click <Apply> to have the setting taken effect.

VLAN ID Type an ID number for identification.

VLAN Configuration List VID - VLAN identifier. Each tag-based VLAN group has

a unique VID. It appears only in tag-based and Double-tag

mode.

Member - Display the selected port members that will

apply to such VALN group.

Modify - Just press the <Modify> button to edit the

selected group entry.

Delete - Just press the <Delete> button to remove the

selected group entry from the Tag-based group table.

VLAN Port Configuration Press the < Port Configuration > button to open the

following page to configure tag-based VLAN group in