Setup guide

Step 2 – Configure the VPN Connection

➏

➎ ➍

➊

‣

VPN Gateway: Enter your DrayTek’s public IP address

➏. If you are using Dynamic DNS, or if the device has

a DNS host name, use it instead (in our example, we

are using the host name “vpn.example.com”)

‣

Local Address: Can be left empty for now. You may

have to eventually enter a specific IP address here,

please see the chapter on “Supporting Multiple

Users” for details

‣

Remote Networks: Enter the calculated network

address ➎ and the subnet mask ➍ of the network

that is being accessed through the VPN tunnel

Separate the subnet mask with a forward slash (“/”)

‣

Local Identifier: Enter the Peer ID from your DrayTek

(e.g. “vpntracker”) ➊

Note If you are missing any of the required information, refer back to the previous chapter.