Setup guide

Step 3 - Configure the New Remote Dial-In User
➊
‣
User Accounts and Authentication
‣
Check the box “Enable this account”
‣
Make sure the Idle Timeout is set to “0”
seconds
‣
Allowed Dial-In Type
‣
Check the box “IPsec Tunnel”
‣
If you don’t plan to be using the other
options (e.g. PPTP), uncheck them
‣
Check the box “Specify Remote Node”
‣
Peer ID: Enter an identifier for this connection
(e.g. “vpntracker”) ➊
‣
IKE Authentication Method
‣
Check the box “Pre-Shared Key”
‣
IPsec Security Method
‣
Uncheck the box “Medium (AH)”
‣
High (ESP): We recommend checking 3DES
and AES, but not DES. Make sure at least one
method is always checked.
Note The peer ID is case-sensitive. Make sure to write down the peer ID, including capitalization.
12