User`s guide

VigorIPPBX 3510 Series User’s Guide
30
2
2
.
.
5
5
O
O
n
n
l
l
i
i
n
n
e
e
S
S
t
t
a
a
t
t
u
u
s
s
The online status shows the system status, WAN status, LAN status and other status related
to this router within one page. If you select PPPoE as the protocol, you will find out a link of
Dial PPPoE or Drop PPPoE in the Online Status web page.
Detailed explanation is shown below:
Primary DNS Display the IP address of the primary DNS.
Secondary DNS Display the IP address of the secondary DNS.
LAN Status
IP Address Display the IP address of the LAN interface.
TX Packets Display the total transmitted packets at the LAN interface.
RX Packets Display the total number of received packets at the LAN interface.
WAN Status
Enable Display if such WAN interface is enabled or not.
Line Display the physical connection (Ethernet) of this interface.
Name Display the name set in WAN page.
Mode Display the type of WAN connection (e.g., PPPoE).
Up Time Display the total uptime of the interface.
IP Display the IP address of the WAN interface.
GW IP Display the IP address of the default gateway.
TX Packets Display the total transmitted packets at the WAN interface.
TX Rate Display the speed of transmitted octets at the WAN interface.
RX Packets Display the total number of received packets at the WAN interface.
RX Rate Display the speed of received octets at the WAN interface.