User`s guide

VigorIPPBX 3510 Series User’s Guide
204
5
5
.
.
1
1
1
1
.
.
4
4
.
.
1
1
S
S
I
I
P
P
P
P
r
r
o
o
x
x
y
y
S
S
e
e
t
t
t
t
i
i
n
n
g
g
To make the IP phone to be registered in IP PBX device successfully, it is necessary for the
users to configure settings in this page.
SIP Local Port
Set a port number as SIP local port. The default setting is
5060.
SIP Proxy Realm
Type SIP service domain name. In full SIP URI, such is the
part after @ symbol.
Parking Server Number
This number is used to communicate with the parking server
and invoke the parking function. The default setting number
is “777”.
1. When you receive a phone call and need to go to the
remote end to talk with the same caller, you have to
hold the phone call and transfer the call to this number
from VoIP phone set.
2. The parking sever will give you another voice number
(e.g., your parking number is XXXX).
Please remember it and hang up the phone set.
3. Next, use another phone set in remote end to
communicate with that caller again by dialing the
voice number (XXXX).
Call Pickup Number
Press the number specified here to pickup a call which is
ringing on another extension. For specific extension pickup,
press 'pickup number' + 'extension number' + #; for group
pickup, just press 'pickup number' + #.
For example, pickup number is *1 and 101 ~ 105 are set in
the same hunt group. When an incoming call rings extension
101; the extension 102~105 can just dial *1# to pickup the
call. However, if the extension 106 wants to pickup that call,
it needs to dial *1101#.
RTP Local Port Start/
If your VoIP service provider gave you such information,