User`s guide

VigorIPPBX 3510 Series User’s Guide
164
5
5
.
.
8
8
.
.
3
3
R
R
A
A
D
D
I
I
U
U
S
S
Remote Authentication Dial-In User Service (RADIUS) is a security authentication
client/server protocol that supports authentication, authorization and accounting, which is
widely used by Internet service providers. It is the most common method of authenticating
and authorizing dial-up and tunneled network users.
The built-in RADIUS client feature enables the router to assist the remote dial-in user and
the RADIUS server in performing mutual authentication. It enables centralized remote
access authentication for network management.
Enable Check to enable RADIUS client feature
Server IP Address Enter the IP address of RADIUS server
Destination Port The UDP port number that the RADIUS server is using. The
default value is 1812, based on RFC 2138.
Shared Secret The RADIUS server and client share a secret that is used to
authenticate the messages sent between them. Both sides must
be configured to use the same shared secret.
Confirm Shared Secret Re-type the Shared Secret for confirmation.