User`s guide

VigorAP 700 User’s Guide

Data Rate Set the wireless data transfer rate to a certain value. Since most of

wireless devices will negotiate with each other and pick a proper

data transfer rate automatically, it’s not necessary to change this

value unless you know what will happen after modification.

N Data Rate Set the data rate of 802.11n clients, available options are MCS 0 to

MCS 15. It’s safe to set this option to Auto and it’s not necessary

to change this value unless you know what will happen after

modification.

Channel Width Select wireless channel width (bandwidth taken by wireless signals

of this access point). It’s suggested to select Auto 20/40MHz. Do

not change to 20 MHz unless you know what it is.

Preamble Type

Set the type of preamble of wireless radio. Do not modify default

value if you don’t know what it is. Default setting is Short

Preamble.

Broadcast SSID Decide if the VigorAP 700 will broadcast its own SSID or not. You

can hide the SSID of your VigorAP 700 (set the option to ‘Disable’),

then only people who know the SSID of your VigorAP 700 can get

connected.

WMM WMM (Wi-Fi Multimedia) technology, which can improve the

performance of certain network applications, like audio/video

streaming, network telephony (VoIP), and others. When you enable

WMM function, the access point will define the priority of different

kinds of data to give higher priority to applications which require

instant responding. Therefore you can improve the performance of

such network applications.

CTS Protect Enabling this setting will reduce the chance of radio signal

collisions between 802.11b and 802.11g VigorAP 700s. It’s

recommended to set this option to Auto.

TX Power You can set the output power of wireless radio. Unless you’re using

this VigorAP 700 in a really big space, you may not have to set

output power to 100%. This will enhance security (malicious /

unknown users in distance will not be able to reach your

VigorAP 700).

After you finish with setting, please click Apply, and the following screen will be displayed: