User`s guide

VigorAP 700 User’s Guide
22
Here are descriptions of every setup item:
Select Click the radio button to select the access point.
Channel Display the channel number of the access point.
SSID Display the SSID name of the access point.
BSSID Display the BSSID (MAC Address) of the access point.
Encryption Display the encryption setting of the access points. If you have
selected the access point with security setting, you have to go to 2-7
Wireless Security to set the same security with the access point you
want to associate.
Authentication Display the authentication type of the access point.
Signal The signal strength of each access point will be displayed here. The
signal strength is stronger, the connection quality is better.
Band Display the wireless modes including 11b, 11b/g or 11b/g/n or 11n
only of the access points.
Refresh Click this button to refresh the table.
Connect Select an access point and click this button to choose the network.
The SSID name of the access point you have selected will be
displayed in the Main SSID in the Basic Setting page.