Installation guide
25
1
1
'
'
2
2
)
)
Configure the Vigor600 Super G Wireless Adapter ( the Wireless Adapter) from the
Profile Management tab. The Wireless Adapter works in either infrastructure mode
(which uses an access point) or ad hoc mode (a group of stations participating in the
wireless LAN). Highlight a configuration profile in the profile list to find out details for
that profile including network type, security mode, and the SSIDs (network names)
associated with that profile.
Profile Activated.
Details Field
Network Type:
Indicates whether the current activated
network type is Infrastructure or Ad Hoc mode.
Security Mode: Indicates current connected network’s
security mode.
Network Name: Indicates current connected network’s
name.
New
To create a new profile.
Modify
To edit settings of the chosen profile.
Remove
To remove the chosen profile from the list.
Activate
To activate the chosen profile.
Import
To import a pre-set profile (pre-saved as a Config File
*.prf).
Export
To export the chosen profile.
So you can save the profile
as a Config File (*.prf) for future use.
Scan
To scan all available network in vicinity.