User manual

EZ Logger Lite - user manual -5-
Chapter 2:Hardware Installation
Step 4: (Optional)
Connect the EZ Logger Lite to
LAN by using the Ethernet UTP
port.
Step 5:
Connect DC power adapter
output into EZ Logger Lite
socket, and plug the DC power
input into the wall socket
Step 6:
Wait a moment and the LCD will
display the IP Address, Subnet
Mask and Gateway. Use a
Browser to log into EZ Logger
Lite Web Interface
The icon on the LCD
indicates that a USB camera is
connected.
The LCD display shows that two
USB cameras are attached to
the EZ Logger Lite
Step 7: (Optional)
Connect the Temperature and
Irradiation sensor wires to EZ
Logger Lite. The pin definitions
are:
 +5V: 5V for external supply,
+/- 5%, 500mA max
 T: Temperature sensor input
 G: Common point
 I: Irradiation sensor (+)
The specification of the sensor
is listed in Appendix D.
+5V T G I