User manual

EZ Logger Lite - user manual -75-
Appendix G: Glossary
If you use a router with DHCP function, the IP address assigned by router is different
form IP from your ISP, in such case; user must set the NAT (Network Address Transfer)
function to map your local IP address and Internet IP. In this situation, to access data
logger, you are not able to key in the IP address shown on LCD, instead, you must key
in the public IP address given by your ISP provider. An example below, to access data
logger, you must key in IP that 201.150.49.43, not the IP shown on LCD.
Fig.57 Public IP example in a router
For setting NAT, please refer to user manual of router.
Fig.58 Internet connection