User manual

EZ Logger Lite - user manual -58-
Appendix A: Router Configuration
NETGEAR (http://www.netgear.com)
RP614 – Web Safe Router
MR814 – Wireless Router
1. Log into your router using your router IP.
2. Click Advanced -> Port Forwarding on the left side of the page.
3. Click Add Customer Service.
4. Enter the following information on the page:
Service Name: EZ Logger Lite – Web
Starting Port: 80
Ending Port: 80
Server IP Address:
Type in the camera’s IP address, for example:
192.168.0.5
5. Click Apply to save the settings.
6. Enter the following information on the page:
Service Name: EZ Logger Lite – Cam
Starting Port: 9001
Ending Port: 9001
Server IP Address:
Type in the camera’s IP address, for example:
192.168.0.5
7. Click Apply to save the settings. EZ Logger Lite should now be configured to
work with your router and be accessible from the internet.
MR314 – Cable/DSL Wireless Router
1. Log into your router using your router IP.
2. Click Advanced on the left side of the page.
3. Click Ports.
4. Enter the following information on the page:
Line #1:
Starting Port: 80
Ending Port: 80
Server IP Address:
Type in the camera’s IP address, for example:
192.168.0.5