User manual

EZ Logger Lite - user manual -47-
Chapter 2:Using the Web Interface to setup camera
To change the saved location and filename. Click and the Save As
window will pop up. Choose an alternate location or filename.
To change Video Codec, click Click Save to confirm changes.
Digital Zoom In, Digital Zoom Out
Rotate Left, Rotate Right
Flip the image vertically.
HotSpot icon. Each item corresponds to HotSpot location set in Basic
Setting 

 Patrol Settings 

 Hotspot Setting. Click to jump to the
pre-set location.
Click S to recalibrate and center the camera.
Directional Tool. Click to move the camera 1 degree in the direction
of the arrow.
Directional Tool. Click to move the camera 5 degrees in the direction
of the arrow.
Auto Patrol icon. Click to enable auto patrolling. Auto Patrol is only
available when a Pan Tilt camera is connected.
Note:
The availability of Codec depends on whether the individual user
has it installed on the PC or not. Download and install Windows Media
Player 10 to enable MPEG4 codec.
Note:
HotSpot icons will not show if you do not have either; (1) a CM03a Pan Tilt
camera, (2) administrator permission or (3) operator permission.
Note:
Directional Tool can also be used with a Static Camera when
viewing in resolution less then 320x240.