User manual

EZ Logger Lite - user manual -36-
Chapter 2:Using the Web Interface to setup camera
Maximum Number of Connections (1-30)
Use this to limit the total number of users that can view this camera at the same
time.
Location
Enter a suitable location / name for the camera. This information will be
displayed when viewing video using Java VM.
Light Compensation
Choose Yes and EZ Logger Lite will increase the lighting of the image. This is
useful when monitoring indoors.
Choose No if you do not want EZ Logger Lite to compensate for bright indoor
lighting and view the images as is.
Color
Choose Yes for colourful and No for black and white display. Black and White
display results in slightly faster FPS (Frames Per Second) video.
Camera Position
Use this option to right the image when EZ Logger Lite is installed on the ceiling
or wall. Select either 0 degree (upright), 90, 180 (upside down), or 270 degree.
Pan Control
Use this function to reverse the Pan direction.
Tilt Control
Use this function to reverse the Tilt controls, if necessary.
4.3 Motion Detection
Fig.46 Motion Detection page
Enable
Note:
If you do not choose the right frequency, the image will flicker or lines will appear on the
images.
Note:
Always click Apply to save any changes made. Otherwise, the changes will be lost.