User manual

EZ Logger Lite - user manual -34-
Chapter 2:Using the Web Interface to setup camera
Chapter 4: Using the Web Interface to setup camera
Whenever there is a USB camera connected to Logger, user can see the photos and
video from the data logger. This can help user to monitor the system by video.
Besides, because of powerful “motion detection” function is build inside the device,
you can also use this feature to do “Anti-thief” purpose.
Click on menu under Camera to start!
Fig.43 EZ Logger Lite Main Menu
When using a camera for EZ Logger Lite at the first time, check the following settings:
a. Camera Settings  Anti Flicker Check that this is set to the correct lighting
frequency. Change this to Outdoor if you intend to point the camera outside.
Click Apply to save the configuration.
b. Manually adjust the camera lens for best results.