User manual

EZ Logger Lite - user manual -30-
Chapter 2:Web Interface for Configuration
Fig.39 Add Time Server dialog box
Time Zone (Relative to GMT)
Select the appropriate time zone. Click Apply to save changes.
System Time (yyyy/mm/dd hh:mm:ss)
This section is to manually set EZ Logger Lite System Time. The format is
pre-determined to: yyyy/mm/dd hh:mm:ss (in 24hr format). Click Manual Adjust
to save the changes.
ii LED Settings
Fig.40 LED Settings
LED function
This function is not applicable.
iii System Settings
Fig.41 System Settings
System Name
Key in the system name
System Contact
System contact person. Usually it is the PV system manager.
System Location
The location name of the PV system
iv Serial Table Settings
Serial Table Settings allow you to save inverter serial number with assigned
address into EZ Logger Lite, so it’s quicker to search all inverters next time.
EZ Logger Lite save serial table procedure
1
Start Pro Control to search all Inverters. (Connection status on the left pane