User manual

EZ Logger Lite - user manual -17-
Chapter 2:Web Interface for Configuration
Fig.16 EZ Logger Lite PPPoE setting
When Connection should be made
Disabled : Default setting.
Connect always : EZ Logger Lite will automatically dial up and maintain
continuous connection.
Automatically reconnect
Enter the interval between each reconnection and number of automatic
reconnections. The reconnection interval can be set between 30 to 9999
seconds.
Login Name
Enter the login name assigned by your ISP.
Login Password
Enter the password assigned by your ISP.
vi GPRS
In case logger is connected with GPRS modem, the following function can be
used for GPRS network
Connection
Select Disable or Always connected to active the connection to GPRS network.
Pin code
Enter the pin code of your GSM/GPRS card. This code is assigned by your
GSM/GPRS Company.
Pin code Confirm
Enter the pin code same as above again.
APN
Enter the APN by your GSM/GPRS card.