User manual

EZ Logger Lite - user manual -12-
Chapter 2:Web Interface for Configuration
Obtain an IP address
This allows the user to choose either to set EZ Logger Lite LAN IP address
MANUALLY or using DHCP (default).
ii DNS Server IP
Fig.13 EZ Logger Lite DNS Server IP
Primary DNS Server IP
This item sets EZ Logger Lite primary DNS Server IP address. By default this is
set to 168.95.1.1
Secondary DNS Server IP
Use this to set EZ Logger Lite Secondary DNS Server IP address EZ Logger
Lite will use the Secondary DNS Server IP address if the Primary DNS Server
IP address is not working. The default IP is 168.95.192.1
iii LAN Port Number
Fig.14 EZ Logger Lite LAN Port Settings
Web access Port Number
This determines the LAN port from which the webpage (using HTTP protocol) is
accessible thru your Router. By default the LAN port number is 80.
If this port is changed other than 80, say to 82, then form of
http://xxx.xxx.xxx.xxx:82 (where xxx.xxx.xxx.xxx is EZ Logger Lite LAN IP
address as shown on the LCD) must be used in order to access EZ Logger Lite
web interface in LAN.
Video access Port Number
This determines the LAN port from which the video image (using UDP protocol)
is streamed thru your Router. By default the LAN port number is 9001.
iv Dynamic DNS
To learn more about the above, see
Appendix C:
IP address, Subnet and
Gateway
Note:
Click Apply to confirm. EZ Logger Lite will reboot. You MUST now manually enter
the NEW IP address in your Browser in order to open the Web Interface.