User manual

EZ Logger Lite - user manual -10-
Chapter 2:Web Interface for Configuration
i. System Information
This section shows general hardware information such as the Hardware and
Firmware Version, the serial number, current / local System Time, the system
name, contact, location and uptime.
ii. IP Status
This section shows the network information. The MAC Address is unique to
each EZ Logger Lite.
iii. Network Server
This section shows information of Network Server of DNS (Domain Name
Server), Time Server, Email Server and Image Server.
iv. Temperature and Irradiation
Whenever the specified Temperature and Irradiation sensor is connected to EZ
Logger Lite, this section is showing the temperature and irradiation measured by
the sensor
3.2.2 Event Log
This section will keep a record of all events that detected by EZ Logger Lite. The user
can Refresh, Clear or Save the log file. There is also an option to sort the logs
according to “Level” or “Type”. EZ Logger Lite can log up to 2,000 events.
Once the number of events has reached the maximum limit, the earliest event will be
replaced for each new event logged.
Note:
If you do not have Administrator privilege, the
Use
r Name
and
IP Address
will be
hidden. Example: Camera A: user ******** connected from IP: *.*.*.*