User manual

EZ Logger Lite - user manual -7-
Chapter 2:Web Interface for Configuration
Chapter 3: Web Interface for Configuration
3.1 Introduction
EZ Logger Lite is designed to work with monitor software. To connect the Logger,
user has to configure it in advance. To configure it, user can set it up though Web
based program such as Internet Explorer as below.
1. Once you have finished the hardware setup shown in Chapter 2, write down the
IP address shown on the LCD.
2. On a PC (located in the same LAN), open a Web Brower (eg.: Internet Explorer,
Netscape, Mozilla Firefox or Opera).
3. Enter the IP Address as shown on the EZ Logger Lite LCD display and press
ENTER.
Fig.6 Enter EZ Logger Lite IP address
4. EZ Logger Lite main screen will appear as below
Fig.7 EZ Logger Lite main screen