Installation manual

Vigor3300 Series Quick Start Guide
13
PPPoE: If your ISP provides you the PPPoE (Point-to-Point Protocol over Ethernet)
connection, please select PPPoE to get the following page. Enter the username and
password provided by your ISP on the web page. And click Apply.
PPTP: If your ISP uses PPTP (Point-to-Point Tunneling Protocol), please select PPTP. Next,
enter the PPTP Local Address (e.g., 10.0.0.2), PPTP Subnet Mask (e.g., 255.255.255.0)
and PPTP Server Address (e.g., 10.0.0.1) provided by your ISP on the web page. And click
Apply.