User`s guide

Vigor300B Series User’s Guide

Do the following steps to mount the router on wall:

1. Attach the brackets on each side of the chassis by using the machine screws. Each side

requires two screws.

2. Locate the wall studs for attaching the router. Drill wall-mount screw holes and put the

studs on the holes first.

3. Make the reserved holes on the brackets align to the studs on the wall. Use machine

screws to fasten the brackets on the wall. Each side requires two screws.

Note: Make the front and the rear of the chassis being perpendicular to the floor. The

front panel should be installed upward that you can read the LEDs.