Operation Manual

Vigor300B Series User’s Guide
84
4
4
.
.
2
2
.
.
4
4
B
B
i
i
n
n
d
d
I
I
P
P
t
t
o
o
M
M
A
A
C
C
This function is used to bind the IP and MAC address in LAN to have a strengthen control in
network. When this function is enabled, all the assigned IP and MAC address binding
together cannot be changed. If you modified the binding IP or MAC address, it might cause
you not access into the Internet.
Each item will be explained as follows:
Item Description
ARP Table
This table is the LAN ARP table of this router. The
information for IP and MAC will be displayed in this field.
Each pair of IP and MAC address listed in ARP table can be
selected and added to IP Bind List by clicking Move on IP
Bind List
.
Mode -
 Enable - Choose it to invoke this function.
However, IP/MAC which is not listed in IP Bind
List also can connect to Internet.
 Disable - Choose it to disable this function. All
the settings on this page will be invalid.
 Strict Bind – Choose it to lock the connection
of the IP/MAC which is not listed in IP Bind List.
Select All - Allow you to choose all the items listed in ARP
Table.
Move -Move the selected item to IP Bind List.
Refresh - It is used to refresh the ARP table. When there is
one new PC added to the LAN, you can click this link to
obtain the newly ARP table information.
IP Address - Display the IP address of one device.
MAC Address - Display the MAC address of the device.
Bind Table
It displays a list for the IP bind to MAC information.
Add -It allows you to add one pair of IP/MAC address and