Operation Manual

Vigor300B Series User’s Guide
49
3G/4G PPP
SIM PIN code -Type PIN code of the SIM card that will be
used to access Internet.
Modem Initial String 1-Such value is used to initialize USB
modem. Please use the default value. If you have any
question, please contact to your ISP.
Modem Initial String 2-The initial string 1 is shared with
APN. In some cases, user may need another initial AT
command to restrict 3G band or do any special settings.
APN -APN means Access Point Name which is provided
and required by some ISPs. Type the name.
Modem Dial String -Such value is used to dial through USB
mode. Please use the default value. If you have any question,
please contact to your ISP.
PPP Username -Type the PPP username (optional).
PPP Password -Type the PPP password (optional).
4G DHCP
SIM Pin code –Type PIN code of the SIM card that will be
used to access Internet.
Network Mode – Force Vigor router to connect Internet
with the mode specified here. If you choose 4G/3G/2G as
network mode, the router will choose a suitable one
according to the actual wireless signal automatically.
APN Name – APN means Access Point Name which is
provided and required by some ISPs.
Default
Click it to restore the default settings.
Apply
Click it to save and exit the dialog.
Cancel
Click it to exit the dialog without saving anything.
4. Enter all the settings and click Apply. The modified profile will be shown as below.