Operation Manual

Vigor300B Series User’s Guide
39
interface will be regarded as breaking down.
Vendor Class ID
(option 60)
It is used to identify the vendor type and the configuration of
a DHCP client.
DHCP Client ID
(option 61)
It used to specify a DHCP client identifier in a host
declaration, so that DHCP can find the host record by
matching against the client identifier.
Specify DNS
Enable – Click it to enable the function of DNS specified.
It is used for local service (e.g., NTP, ping diagnostic) or
used for forwarding packets to PC on LAN/VPN.
Disable – Click it to disable the function of DNS specified.
DNS
Add – click this button to have a field for adding a new IP
address.
Save – click this button to save the setting.
– click the icon to remove the selected entry.
Apply
Click it to save the configuration and exit the dialog.
Cancel
Click it to exit the dialog without saving the configuration.