Operation Manual

Vigor300B Series User’s Guide
36
Address
cursor on this filed. The following dialog will appear.
Add – click this button to have a field for adding a new IP
address.
Save – click this button to save the setting.
– click the icon to remove the selected entry.
IP Alias
Type other IP addresses to be bound to this interface. This
setting is optional. If you have typed addresses here, you can
see and choose it in later web page settings (e.g.,
NAT>>Port Redirection/DMZ Host).
Add – Click this button to display the IP address field for
adding a new IP address. Type the IP address on the tiny
boxes one by one.
Save – Click this button to save the setting.
– click the icon to remove the selected entry.
MTU/MRU
Type the value of MTU/MRU. The default value is 1500.
Connection
Detection Mode
Select a detecting mode for this WAN interface. There are
three ways ARP, PING and HTTP supported in Vigor
router for you to choose to send the request out.
Connection
Detection Host
This function is available when Connection Detection
Mode is set with PING or HTTP.
Add – click this button to have a field for adding a new IP
address. Assign an IP address or Domain name as a