Operation Manual

Vigor300B Series User’s Guide
34
Port
Display the physical WAN interface for such profile.
Default MAC
Address
Enable – Click it to enable the default MAC address for
such profile.
Disable – Click it to type the MAC address manually for
such profile.
MAC Address
Specify the MAC address for such profile. In default, the
system will determine it automatically.
IPv4 Protocol
There are several connection modes for you to specify for
IPv4 protocol type. Each mode will bring up different web
page.
The DMZ protocol is available for WAN4 profile only.
IPv4 Mode
Determine such profile will be used for.
IPv6 Protocol
There are four connection modes for you to specify for IPv6
protocol type. Each mode will bring up different web page.
Enable Schedule
Reconnect
Enable – Click it to enable the function of reconnecting the
network automatically within the time schedule.
Disable – Click it to disable the schedule reconnect function.
Schedule Time
Object
Choose the time object profile to be applied by such WAN.
VLAN Tag
Enable – Click it to enable the function of VLAN Tag. Data
transmitted through the router will be tagged with specified
number for identification.
Disable – Click it to disable the function of VLAN Tag.
Data transmitted through the router will not be tagged with
any number.
VLAN ID
Type the VLAN ID number for such profile.
Priority(802.1p)
Type the packet priority number for such VLAN. The range
is from 0 to 7.