Operation Manual

Vigor300B Series User’s Guide
289
Cancel
Click it to discard the settings configured in this page.
Enter all of the settings and click Apply.
4
4
.
.
1
1
1
1
.
.
6
6
A
A
c
c
c
c
e
e
s
s
s
s
C
C
o
o
n
n
t
t
r
r
o
o
l
l
4
4
.
.
1
1
1
1
.
.
6
6
.
.
1
1
A
A
c
c
c
c
e
e
s
s
s
s
C
C
o
o
n
n
t
t
r
r
o
o
l
l
This page allows you to open or close the Web User Interface of Vigor300B by using Telnet,
SSH, HTTP, HTTPS… and etc…
Available parameters are listed as follows:
Item Description
Default: Disable
Auto-Logout
Enable – Vigor router will auto logout based on the
specified time setting (e.g., 1, 3, 5 and 10 minutes).
Disable – Default setting. The function of Auto-Logout will
be disabled.
Use Validation Code
Enable – While accessing into the web user interface of
Vigor router, a validation code will appear to authenticate
the user trying to log into web user interface.
Disable – No validation will be done when a user tries to log
into the web user interface of Vigor router.
Fail Times to Trigger - It is available when Use Validation
Code is enabled.
The number selected here means the times for login failure
that will trigger Validation Code for authentication. The
default setting is "0". That means no failure of login is
allowed.
Customized Login
Image
Specify an image file which will be displayed on the login
page when a user or guest tries to access into Internet.
Upload Login Image – Choose a file to upload to
Vigor3900. It is useful for advertisement.
Internet Access Control
Apply to WAN Interface
Choose the WAN interface(s) to apply such feature.