Operation Manual

Vigor300B Series User’s Guide
268
Source IP Group
Display the source IP group profile name.
Time Object
If no time schedule is set, None will be shown in this field.
Time Group
Display the Time group profile selected for such application
profile.
Default TX/RX Limit
The default limit will apply to LAN IP(s) not in the above
configuration profiles
Default TX Limit – Define the limitation for the speed of
the upstream.
Default RX Limit –Define the limitation for the speed of the
downstream.
Enable Smart
Bandwidth Limit
Check this radio button to configure the default limitation for
bandwidth for any LAN IP not included in the Limitation
List.
Session Threshold
When session number exceeds the set threshold, Smart
Bandwidth limit will work.
TX Limit
Define the speed of the upstream for Smart Bandwidth
Limit. If you do not set the limit in this field, the system will
use the default speed for the data transmission.
RX Limit
Define the speed of the downstream for Smart Bandwidth
Limit. If you do not set the limit in this field, the system will
use the default speed for the data transmission
Apply
Click it to save and exit the dialog.
Cancel
Click it to discard the settings configured in this page.