Operation Manual

Vigor300B Series User’s Guide
266
Item Description
Profile
Type the name of the profile.
Enable
Check this box to enable such profile.
Max Sessions
Defines the available session number for each host in the
specific range of IP addresses. If you do not set the session
number in this field, the system will use the default session
limit for the specific limitation you set for each index. This
field cannot be typed with “0”, otherwise the profile cannot
be saved.
general target
Time Object - Click the triangle icon
to display the
profile selection box. Choose a schedule object profile to be
applied on such rule. You can click
to create another
new time object profile.
Time Group - Click the triangle icon
to display the
profile selection box. Choose a schedule group profile to be
applied on such rule. You can click
to create another
new time group profile.
source target
Source IP Object - Click the triangle icon
to display the
profile selection box. Choose one or more IP object profiles
from the drop down list. The selected profile will be treated
as source target. You can click
to create another new IP
object profile.
Source IP Group - Click the triangle icon
to display the
profile selection box. Choose one or more IP group profiles
from the drop down list. The selected profile will be treated
as source target. You can click
to create another new IP
group profile.
Apply
Click it to save the configuration and exit the dialog.
Cancel
Click it to exit the dialog without saving the configuration.
4. Enter all the settings and click Apply.
5. A session limit profile has been created.