Operation Manual

Vigor300B Series User’s Guide
217
MAC Binding
Specify a MAC address which is limited and used for such
PPPoE account.
Enable – Click it to enable the function.
MAC Address – If MAC Binding is enabled, simply type
the MAC address of the router in this field.
Idle Timeout (sec)
If the user is idle over the limitation of the timer, the
network connection will be stopped for such user. By
default, the Idle Timeout is set to 300 seconds.
DHCP from
Choose a LAN profile for DHCP server IP dispatching.
Remote clients using this profile to do PPTP/L2TP dial-in
will be assigned IP addresses according to this DHCP pool.
Static IP Address
Type an IP address for such user profile which accesses
Internet with PPTP/L2TP connection.
FTP/SAMBA User Setting
Allow FTP/SAMBA
Server Login
Click Enable to allow the remote user accessing into
Internet via FTP/SAMBA server.
Radius User Setting
Allow Radius
Server Login
Click Enable to allow the remote user accessing into
Internet via Radius server.
Apply
Click it to save the configuration.
Cancel
Click it to exit the dialog without saving the configuration.
4. Enter all the settings and click Apply.
5. A new User Profile has been created.