Operation Manual

Vigor300B Series User’s Guide
141
Available parameters are listed as follows:
Item Description
Group
Type the name of the IP filter group.
Enable
Check the box to enable this profile.
Comment
Give a brief description for the profile.
Apply
Click it to save and exit the dialog.
Cancel
Click it to exit the dialog without saving anything.
4. Enter all of the settings and click Apply.
5. A new filter group has been added.
6. You can create filter rule by clicking
on the left side of the selected IP filter group
profile. A setting page will appear for you to add new IP filter rule profile.
7. Move your mouse to click Add.