Operation Manual

Vigor300B Series User’s Guide
98
4
4
.
.
3
3
.
.
2
2
.
.
3
3
L
L
A
A
N
N
/
/
W
W
A
A
N
N
P
P
r
r
o
o
x
x
y
y
A
A
R
R
P
P
To make local device in LAN accessing into external network without passing NAT or let
the remote device access into the local device without passing NAT behind the router, please
use IP routing function to complete the work.
Usually, the local device might be assigned with a public IP address or an IP address with
the same subnet as certain WAN. When the local device tries to transmit the data packets out,
Vigor300B will send it out through that certain WAN interface without passing through
NAT. Meanwhile, remote device also can access the local device directly without any
difficulty.
Each item will be explained as follows:
Item Description
Add
Add a new static route setting.
Edit
Modify the selected static route setting.
To edit static route setting, simply select the one you want to
modify and click the Edit button. The edit window will
appear for you to modify the corresponding settings for the
selected rule.
Delete
Remove the selected static route setting.
To delete a static route setting, simply select the one you
want to delete and click the Delete button.
Rename
Allow to modify the selected profile name.
Refresh
Renew current web page.
Profile Number Limit
Display the total number of the profiles to be created.
Profile
Display the name of such profile
Enable
Display the status of the profile. False means disabled; True
means enabled.
WAN Profile
Display the WAN profile used for such ARP profile.
LAN Profile
Display the LAN profile used for such ARP profile.
IP
Display the IP address used by such ARP profile.