Installation guide

Vigor300B Quick Start Guide
19
S
S
t
t
e
e
p
p
2
2
After clicking Next, you can see the following page which will vary according to the IPv4
protocol type selected in Step 1.
z For Static type, the page will be displayed as follows:
Available settings are explained as follows:
Item Description
IP Address
Type the IP address of the router for the WAN profile.
Subnet Mask
Choose the static mask from the drop down list.
Gateway IP Address
Type a public gateway address for such WAN profile.
- click it to remove the IP address if you are not
satisfied with it.
DNS Server IP
Address
Type a public IP address as the primary DNS (Domain Name
Server). To add a new IP address, simply Add. Four boxes
will appear for you to type the IP address. When you finish
the settings, click Save.