Installation guide

Vigor300B Quick Start Guide
9
Do the following steps to mount the router on wall:
1. Attach the brackets on each side of the chassis by using the machine screws. Each
side requires two screws.
2. Locate the wall studs for attaching the router. Drill wall-mount screw holes and put
the studs on the holes first.
3. Make the reserved holes on the brackets align to the studs on the wall. Use machine
screws to fasten the brackets on the wall. Each side requires two screws.
Note: Make the front and the rear of the chassis being perpendicular to the
floor. The front panel should be installed upward that you can read the LEDs.