User`s guide

Vigor2960 Series User’s Guide
57
Source IP Address
Type a WAN IP address here as the source IP address for
such rule.
– Click the icon to clear the IP setting.
Source Mask
Use the drop down list on the right to choose a suitable mask
for the source.
Destination IP
Address
Type a WAN IP address here as the destination IP address
for such rule.
– Click the icon to clear the IP setting.
Destination Mask
Use the drop down list on the right to choose a suitable mask
for the destination.
Destination Port
Start
Type a value as the destination port starting for such rule.
Destination Port
End
Type a value as the destination port ending for such rule.
Load Balance Pool
/WAN Profile
Choose one of the profiles to be used by such rule. In which,
wan1 to wan5 profiles are configured in default. In addition,
profiles configured in WAN>>Load Balance Policy>> Pool
page also will be displayed here.
To have user-defined WAN profile, please refer to
WAN<<General Setup for detailed information.
Apply
Click it to save the configuration.
Cancel
Click it to return to the factory setting.
4. Enter all the settings and click Apply. The new rule profile will be added on the screen.