User`s guide

Vigor2960 Series User’s Guide
38
Port
Display the physical WAN interface for such profile.
Default MAC
Address
Enable – Click it to enable the default MAC address for
such profile.
Disable – Click it to type the MAC address manually for
such profile.
MAC Address - Specify the MAC address for such profile if
you click Disable for Default MAC address. In default, the
system will determine it automatically.
Mode
Determine such profile will be used for NAT or routing.
IPv4 Protocol Type
There are four connection modes for you to specify for IPv4
protocol type. Each mode will bring up different web page.
IPv6 Protocol Type
There are four connection modes for you to specify for IPv6
protocol type. Each mode will bring up different web page.
Apply
Click it to save the configuration and exit the dialog.
Cancel
Click it to exit the dialog without saving the configuration.
Global configuration allows you to enable the profile, give a brief explanation for such
profile, specify the VLAN ID, specify MAC address, choose IPv4 and IPv6 protocol,
and specify the mode of the data transmission (NAT or Routing).