User`s guide

Vigor2960 Series User’s Guide
183
Available parameters are listed as follows:
Item Description
Type
Specify which protocol (PPTP or IPSec) will be used for
such VPN profile.
VPN Settings Via
Select From Current Settings - Current VPN LAN to LAN
profiles will be listed below such setting. Choose the one
you need.
Create New VPN Profile – It allows you to create a new
VPN LAN to LAN profile. Simply type the name in the field
of Profile Name. The field of Profile Name is available only
when you click this setting.
Profile Name
Type a new name for such profile.
Next
Go to next page.
Cancel
Cancel the configuration and return to the home page of such
function.
2. Fill in the required information on this page and click Next. If you choose IPSec as the
Type, you will get the following screen:
Available parameters are listed as follows:
Item Description
Profile
Display the name of such profile.
Enable This Profile
Check this box to enable such profile.
Auth Type
The authentication to be used by Pre-Shared Key or RSA
Signature. Choose PSK or RSA for such profile.