User`s guide

Vigor2960 Series User’s Guide
125
3. The following dialog will appear.
Available parameters are listed as follows:
Item Description
Group Name
Type the name of the object group. The number of the
characters allowed to be typed here is 20.
Interface
Determine the category (any, source or destination) of this IP
object. If an IP object is set to Source, it will only appear in
the field of Source IP on Firewall>>IP Filter Rule.
Description
Make a brief explanation for such profile if the group name
is set not clearly.
Objects
Use the drop down list to check the IP object profiles under
such group.
All the available IP objects that you have added on Objects
Setting>>IP Object will be seen here.
Apply
Click it to save the configuration.
Cancel
Click it to exit the dialog without saving anything.
4. Enter all the settings and click Apply.