User`s guide

Vigor2960 Series User’s Guide
65
Item Description
Profile
Display the name of the LAN profile.
Enable This Profile
Check this box to enable this profile.
Start IP
Set the starting IP address of the IP address pool for DHCP
server.
End IP
Set the ending IP address of the IP address pool for DHCP
server.
DNS
Set the private IP address for DNS server. If this field is
blank, users on LAN will treat Vigor2960 as the DNS server.
Add – Click it to add a new IP address for DNS server.
Save – Click it to save the setting.
– click the icon to remove the selected entry.
Routers
In general, this box will be blank. It means Vigor2960 will
be regarded as the gateway for the user.
However, if you want to use other gateway, please assign the
IP address in this field.
Lease Time
Set a lease time for the DHCP server. The time unit is
minute.
Specify Remote
Dial-in IP
Enable – Enable this function that remote clients within the
range specified below can access into Vigor2960 WUI.
Disable – Disable this function.
Remote Dial-in
Start IP
Specify the start IP address for an IP range. The DHCP
server can assign an IP address for remote dial-in user from
such IP range.
Remote Dial-in End
IP
Specify the end IP address for an IP range. The DHCP server
can assign an IP address for remote dial-in user from such IP
range
Apply
Click it to save and exit the dialog.
Cancel
Click it to exit the dialog without saving anything.
4. When you finish the above settings, please click Apply to save the configuration and
exit the dialog.
5. The LAN profile has been edited.