User`s guide

Vigor2960 Series User’s Guide
39
Different IPv4 and IPv6 protocol types specified will bring up different configuration
web page.
z If you choose Static as IPv4 protocol type, click the Static tab to open the following
page:
Available parameters are listed as follows:
Item Description
IP Address
Type the IP address specified for such profile.
Subnet Mask
Use the drop down list to choose the subnet mask for such
profile.
Gateway IP
Address
Type a public gateway address for such WAN profile.
- click it to remove the IP address if you are not
satisfied with it.
DNS Server IP
Address
Add – Click this button to display the IP address field for
adding a new IP address. Type the IP address on the tiny
boxes one by one.
Save – After finished the IP address configuration, click
Save to save the setting onto the router.