User`s guide

Vigor2960 Series User’s Guide
207
Available parameters are listed as follows:
Item Description
Profile
Type the name of the profile.
Enable This Profile
Check this box to enable such profile.
Protocol
Type the protocol configured by such profile.
Source IP Address
Type the source IP address specified for this profile.
Source Mask
Type the subnet mask address specified for the source IP.
Destination IP
Address
Type the destination IP address specified for this entry.
Destination Mask
Type the subnet mask address specified for the destination
IP.
Destination Port
Start
Type the start point specified in the Dest Port Range.
Destination Port
End
Type the end point specified in the Dest Port Range.
Load Balance Pool
Use the drop down list to choose one profile configured in
load balance pool. Then, such rule will be applied by the
pool.
Apply
Click it to save the configuration.
Cancel
Click it to exit the page without saving the configuration.
4. Enter all the settings and click Apply.
5. A new profile has been created.