User`s guide

Vigor2960 Series User’s Guide
195
4. After filling the required information for Basic, click the Advanced tab to open the
following page.
Available parameters are listed as follows:
Item Description
Aggressive Mode
Enable – Click it to enable Aggressive Mode.
Disable – Click it to disable Aggressive Mode.
Local Peer ID
Type the ID for Vigor2960 which can be configured by the
remote end. It is available for Aggressive Mode enabled
only.
Remote Peer ID
Peer ID is on behalf of the IP address while identity
authenticating with remote VPN server. The length of the ID
is limited to 47 characters. It is available for Aggressive
Mode enabled only.
Phase 1 Key Life
Time
The rekey-renegotiated period of the IKE Phase1 keying
channel of a connection. The acceptable range is from 5 to
480 minutes (8 hours).
Phase 2 Key Life
Time
The rekey-renegotiated period of the IKE Phase 2 keying
channel of a connection. The acceptable range is from 5 to
480 minutes (8 hours).
Perfect Forward
Secrecy Status
Enable the PFS function. A new Diffie-Hellman Key
Exchange is included every time an encryption and/or
authentication key are computed on PFS.
Dead Peer
Detection Status
Enable or disable the DPD function.
DPD Delay
The keep-alive timer. A Hello message will be emitted