User`s guide

Vigor2960 Series User’s Guide
180
Enable This Profile
Check this box to enable such profile.
Always On
Click Enable to make router always keeping connection.
Server IP Address
Type the IP address of PPTP server.
PPTP User Name
Type a user name for authentication in PPTP connection.
PPTP Password
Type a password for authentication in PPTP connection.
Local IP/Subnet
Mask
Type the IP address and subnet mask of local host.
Remote IP/Subnet
Mask
Type the LAN IP address and LAN subnet mask for the
remote host.
If you choose IPSec as the Type, you will get the following screen:
Available parameters are listed as follows:
Item Description
Profile
Display the name of the VPN profile.
Enable This Profile
Check this box to enable such profile.
Auth Type
The authentication to be used by Pre-Shared Key or RSA
Signature. Choose PSK or RSA for such profile.
Certificate
Choose a local certificate from the drop down list.
Preshared Key
Type a pre-shared key for authentication if PSK is selected
as Auth Type.
Security Protocol
Choose ESP to specify the IPSec protocol for the
Encapsulating Security Payload protocol. The data will be
encrypted and authenticated. Choose AH to specify the
IPSec protocol for the Authentication Header protocol. The