User`s guide

Vigor2960 Series User’s Guide
299
Available parameters are listed as follows:
Item Description
Type
Specify which protocol (PPTP or IPsec) will be used for
such VPN profile.
VPN Settings Via
Select From Current Settings - Current VPN LAN to LAN
profiles will be listed below such setting. Choose the one
you need.
Create New VPN Profile – It allows you to create a new
VPN LAN to LAN profile. Simply type the name in the field
of Profile Name. The field of Profile Name is available only
when you click this setting.
Profile Name
Type a new name for such profile.
Next
Go to next page.
Cancel
Cancel the configuration and return to the home page of such
function.
3. Click Create New VPN Profile and type the name of the profile. Click Next to get into
next page. Note that if you choose PPTP as the Type in Step 2, you will see the page
as below:
Item Description
Profile
Display the name of the profile.
Enable
Check this box to enable such profile.
PPTP User Name
Choose a user for authentication in PPTP connection.
Such profile shall be created in User Management>>User
Profile previously. Otherwise, there are no selections