User`s guide

Vigor2925 Series User’s Guide
375
List.
Advanced
To build a VPN connection with detailed configuration (such
as PPP authentication and VJ compression), click Advanced.
Specify the remote CPE from the Device drop down list; select
PPTP or IPsec as the Dial Type; choose PAP only or PAP or
CHAP as PPP authentication; enable (ON) or disable (OFF) VJ
Compression; then click OK to build the VPN connection
CPE VPN Connection List
VPN
Display the name of the LAN-to-LAN profile.
It is generated automatically when you click the
PPTP/IPsec/Advanced button to build the VPN connection
between Vigor2925 and remote CPE.
Type
Display the dial-in type and the authentication method.
Remote IP
Display the IP address of the remote CPE and the interface.
Virtual Network
Display the IP address and subnet mask of Vigor2925 series.
Tx Pkts
Display the number of the transmitted packets.
Tx Rate(Bps)
Display the number of the transmitted rate.
Rx Pkts
Display the number of the received packets.
Rx Rate(Bps)
Display the number of the received rate.
UP Time
Display the connection time of such VPN.
4
4
.
.
1
1
4
4
.
.
4
4
L
L
o
o
g
g
&
&
A
A
l
l
e
e
r
r
t
t
This page offers brief information to identify the CPE connected to Vigor2925 series.
Available settings are explained as follows: