User`s guide

Vigor2925 Series User’s Guide
372
Enable
Check it to enable such profile.
Device Name
The drop down list will display all the CPE devices detected
by Vigor2925 series. Choose the one which will be applied
with such new created profile.
Action Type
There are three actions for you to choose for such profile.
Config Backup – It means such profile will be used for
configuration backup of the selected CPE.
Config Restore – It means such profile will be used for
restoring the configuration of the selected CPE.
Note: When restoring configuration to a CPE, make
sure the configuration file you selected was backup
from this CPE before. Because restoring from another
device's configuration file may cause serious problem
(e.g., Both devices have different ISP username/
password. Restoring configuration from one CPE to the
other will cause Internet connection not being online).
Firmware Upgrade – It means such profile will be used for
firmware upgrade.
File/Path
Click Select to locate the file you want to save, restore or
upgrade for CPE.
Index in Schedule
Vigor2925 series will perform the specified action to the
selected CPE based on the schedule configured here.
Specify one or two schedule profiles (represented by
number) here.
7. Enter all the settings and click OK.
8. A new maintenance profile has been created.