User`s guide

Vigor2920 Series User’s Guide
97
Firmware Version
Display the firmware version of the router.
Build Date/Time
Display the date and time of the current firmware build.
LAN-------
LAN1/LAN2/LAN3/LAN4
There are four LAN ports with different IP address offered by
Vigor router. The MAC address, IP address, Subnet Mask,
DHCP Server and DNS settings for each LAN port is displayed.
IP Routed Subnet
Display the general information for the usage of IP routed.
MAC Address
Display the MAC address of the LAN Interface.
IP Address
Display the IP address of the LAN interface.
Subnet Mask
Display the subnet mask address of the LAN interface.
DHCP Server
Display the current status of DHCP server of the LAN
interface.
DNS
Display the assigned IP address of the primary DNS.
Wireless LAN-------
MAC Address
Display the MAC address of the wireless LAN.
Frequency Domain
It can be Europe (13 usable channels), USA (11 usable
channels) etc. The available channels supported by the wireless
products in different countries are various.
Firmware Version
It indicates information about equipped WLAN miniPCi card.
This also helps to provide availability of some features that are
bound with some WLAN miniPCi.
SSID
Display the SSID of the router.
WAN-------
Link Status
Display current connection status.
MAC Address
Display the MAC address of the WAN Interface.
Connection
Display the connection type.
IP Address
Display the IP address of the WAN interface.
Default Gateway
Display the assigned IP address of the default gateway.
3
3
.
.
8
8
.
.
2
2
U
U
s
s
e
e
r
r
P
P
a
a
s
s
s
s
w
w
o
o
r
r
d
d
This page allows you to set new password for user operation.
Old Password Type in the old password. The factory default setting for
password is blank.